Shenzhen Crescent Optoelectronic Co., Ltd.
Exhibition
Are SMD LED Beads Environmentally Friendly?
At present, more and more surface mounting device led beads have replaced conservative lighting lamps, and are used in l...
What are the Differences between COB Package and SMD Package in the Field of LED Display?
The existence of double giants in the field of LED display has jointly developed and flourished the LED industry. As a c...
5614 35W ACIC Flip COB LED Series
  • 5614-35w-3_1545369965.jpg
  • 5614-35w-4.jpg

5614 35W ACIC Flip COB LED Series

We choose use the ACIC solution, it can save the cost of power supply, we usually call the name of  light source and  power integration engine directly, and the same as namely the wrap dress and inversion technology combined with linear program, let its directly connected to AC110/220 v ,then the led module can work,so this solution can make the LED lighting technology comprehensively to standardization, intelligent, scale, automation, standardization.

Product Features of 5614 35W ACIC Flip COB LED

1. We choose use the ACIC solution, it can save the cost of power supply, we usually call the name of  light source and  power integration engine directly, and the same as namely the wrap dress and inversion technology combined with linear program, let its directly connected to AC110/220 v ,then the led module can work,so this solution can make the LED lighting technology comprehensively to standardization, intelligent, scale, automation, standardization.
2. It also reduce the technological process of lamps and lanterns,
3. In the further it reduces the cost of factory with the processing cost and artificial ;
4. It also is short of the production time;
5. This solution can get rid of the traditional power supply device, large volume, complex processing and the defective rate is high, the inconvenience of production, increase the utilization rate of LED lamps and lanterns and the production efficiency, it also reduce the  failure rate of LED lamps when the lighting are used;
6. The radiator heat resistance can be 95 degrees.
7. Dimension: φ56mm×1.0mm
8. Integration and AC technology
9. PF>0.90 THD<25%
10. These products can pass CE/EMC+CE/LVD
11. The Hipot Test >3750V
12. RoHS These products have  RoHS compliant


Electrical-Optical Characteristics


Power (W) Product Code CCT(K) Chip Voltage(V) Current(Ma) Efficacy(lm/w) CRI
35W XY1-56CD0F-54SF35-2 5400±250 XY 1031 AC210-240V / 65-75 ≥80
35W XY1-56CD0F-57KF35-1 5700±250 XY 1031 AC100-120V / 60-70 ≥80

Notes for Table

  • The capacity of heat sink :Tj-IC<125℃
    Tj-IC =Tp+PIC*RIC (PIC=2.5W RIC=9℃/W Tp:surface temperature of IC)
  • All extreme conditions need to be satisfied.


Absolute Maximum Ratigs: TA=25±5℃


Item Symbol Absolute Maximum Ratig Unit
Perk Voltage Vf(AC) 130 V
Pulse Forward Current IFP 550 mA
Rcverse Voltage VR V
Power PD 35 W
Operating Temperature Topr -35℃ TO +80℃
Storage Temperature Tstf -40℃ TO +100℃
Soldering Temperature Tsld Hand Soldering:350℃/3S /


Notes for Table

  • Operating Voltage doesn't indicate the maximum voltage which customers use but means tolerable voltage according to each country’s voltage variation rate.
  • Color bins are defined at transient operation
  • The tolerance of measurement at our tester is Φv+/-10% and Ra+/-2.
  • Tolerence of ±0.005 on x,y coordinates.
  • Tolerence of ±5% on Power dissipation.
  • Φv is the total luminous flux output measured with an integrated sphere.
  • Surge is defined as damage that may occur when an electronic device is subjected to a
  • Voltage that is beyond the maximum specification limits of the device. Refer to the note 3.
  • Base Board: 1.0mm aluminum substrate, Thermal resistance1 W/(m.K)


Leave a Message