Product Advantage of 1/3W White High Power LED
Spot color uniform consistency, can provide knitting bag packaging, support automatic SMT SMT, products through the high and low temperature cold heat shock (40/30min-125/30min),300 rounds of reliability test is higher than the same industry the most stringent reliability test standard, quality is reliable.
Single LED Product Instructions:
-
It is recommended to use power less than 20 w iron, welding temperature must be kept below 360 ℃, avoid multiple welding, welding at a time.
-
The connection time shall not exceed 3 seconds; Manual welding process is easy to cause damage to LED products, should be careful.
-
It is recommended to use lead-free reflow soldering, temperature setting up to 180 ℃ plus or minus 10 ℃ (to tunnel furnace temperature area actual daily measurement temperature).
-
The peak temperature time shall not exceed 45 seconds. Excessive temperature and timeout will lead to lens shedding and deformation. Please do not correct during reflow welding
-
Apply any pressure to the product. After welding, the product will be processed after the temperature drops to room temperature.
-
After welding is recommended to use alcohol to clean, the temperature is not higher than 30 ℃ conditions with a clean cloth and a small amount of alcohol
-
Shall not exceed 3 minutes, wash, time is not higher than under the condition of 50 ℃ for 30 seconds.
-
Adopts different solder paste (cleaning equipment of solder paste brush is not complete), different types of products (glue composition is different) cannot be cross-mixed (tunnel)
-
Full exhaust is required in the temperature zone of the track furnace) to avoid chemical reactions between different substances and damage to LED products.
Product Specification
Product Code
|
Common color temperature and code
|
Chips
|
Luminous Flux(lm)
|
Forward Voltage
|
Current(mA)
|
Ra
|
D01-A1-XY35
|
6250K±250K(D3)
4000K±200K(K3)
3000K±100K(T3)
1900K100K(HT1)
|
35
XY-35
|
120-130
|
3.0-3.4
|
350
|
>70
|
D03-A1-XY45
|
45
XY-45
|
140-150
|
D01-A1-JOS
|
2630*2
JOS 2630*2
|
160-170
|
D01-A1-A30
|
30
A30
|
110-120
|
D03-A1-J45
|
45
J45
|
150-160
|
RecommendedIndustrial Lighting Source
Product Code
|
Common color temperature and code
|
CRI(Ra)
|
Luminous Flux(lm)
|
voltage range(v)
|
Current(mA)
|
Chip
|
DO1-B6-XY0Q65D-1C2
|
6000-7000K(CD)
|
>70
|
120-130
|
3.0-3.4
|
350
|
XYOQ
|
D01-A1-XY30-60D-1C1
|
6000-6500K/D3
4000-4200K/K3
3000-3100K/T3
|
120-130
|
XY 30
|
D01-A1-XY35-60D-1c1
|
130-140
|
XY 35
|
D01-A1-XY45-60D-1C1
|
150-170
|
XY 45
|
D01-A1-A30-60D-1C1
|
120-130
|
Epistar30
|
D01-A1-A33-60D-1C1
|
130-140
|
Epistar 33
|
D01-A1-A45-60D-1C1
|
150-170
|
Epistar/BridGelux 45
|
D01-A1-JOS-60D-103
|
180-200
|
BridGelux multi - chips high light efficiency
|
Recommended Landscape Lighting Source
Product Code
|
Common color temperature and code
|
Luminous Flux(lm)
|
Forward Voltage
|
Current(mA)
|
D01-A1-A33-30B-1C1
|
3000-3100K/T3
|
120-130
|
3.0-3.4
|
350
|
D01-A1-A33-19A-1C1
|
1900-2000K/H23
|
110-120
|
Recommended Mobile Lighting Source
Product Code
|
Common color temperature and code
|
Color Rendering Index(Ra)
|
Luminous Flux(lm)
|
Forward Voltage(v)
|
Current(mA)
|
D01-B6-XYOQ65D-1C2
|
6000-7000K/CD
|
70
|
120-130
|
3.0-3.4
|
350
|
Packing Specification:
Size of tube
|
Mode of packing
|
Carton size
|
quantity per Each tube
|
quantity per each carton
|
Gross weight
|
420*17*8
|
1*50*20*10
|
45*210*180
|
50pcs
|
1000pcs
|
8.6KG
|