Shenzhen Crescent Optoelectronic Co., Ltd.
Are SMD LED Beads Environmentally Friendly?
At present, more and more surface mounting device led beads have replaced conservative lighting lamps, and are used in l...
What are the Differences between COB Package and SMD Package in the Field of LED Display?
The existence of double giants in the field of LED display has jointly developed and flourished the LED industry. As a c...

Advantages and Differences of LED PCT

LED PCT can achieve incomparable color stability and low water absorption compared with other similar materials. It can be used for large outdoor LED screens, indoor lighting and 3C consumer electronics, and can achieve good environmental adaptability. Characteristic: Excellent whiteness and low attenuation; Excellent light and heat resistance; Extremely low water absorption; Excellent light stability; Excellent mechanical strength; Excellent melting fluidity; Suitable for low-temperature production; Shorten molding cycle and improve production efficiency. At present, there are three kinds of LED packaging brackets on the market: PPA, PCT and EMC. The main differences are as follows: The three kinds of stents have different materials, structures and production processes.

PPA is an injection molding process; PCT materials have poor fluidity with troublesome operating process, so traditional stamping process is needed; EMC stents are produced by die top process. PPA and PCT are thermoplastic materials, while EMC is mainly made of epoxy resin and thermosetting materials. The temperature resistance of EMC LED is higher than that of PPA and PCT LED. The temperature resistance, yellowing and air tightness of PPA are lower than those of EMC and PCT, but the price of EMC has advantages. PPA, PCT and EMC can be enhanced because of the different heat dissipation. Due to different heat dissipation, PPA support can only achieve 0.1-0.2 W, PCT should be able to achieve 0.8 W at present. EMC bracket has the advantages of high heat resistance, yellowing resistance, high current, high power, high density, UV resistance and small size. At present, EMC bracket is favored by packaging factories. Many packaging enterprises have set up PCT production lines. PCT LED bracket is the development trend of later LED packaging.
Related News
  • LED Chip Voltage

    LED Chip Voltage

    January 19, 2019An LED chip is actually a light emitting diode that emits light when loaded with a certain voltage and current. Generally speaking, the voltage of a single led chip is about 3V and the current is 30mA...view
  • Discussion on Four Categories of SMD LED Lamp Beads

    Discussion on Four Categories of SMD LED Lamp Beads

    June 27, 2019With the rapid development of LED display, there are many different types and sizes of led. SMD LED, LED beads and other products also occupy a place in the LED industry, especially the application of...view
  • Application of LED

    Application of LED

    January 22, 2019LED lamps are widely used in various indoor and outdoor displays, which are divided into full-color, tri-color and monochrome displays, which has the characteristics of anti-seismic, impact resistance...view
  • Uncover The Secret Of How To improve The Energy Efficiency Of Green cob led

    Uncover The Secret Of How To improve The Energy Efficiency Of Green cob led

    March 13, 2019As everyone knows, the performance level of green cob led does not reach the same red and blue LED. However, black spots can be reduced by reducing current density, using a larger chip, and optimizing...view